---
summary: "Exec tool usage, stdin modes, and TTY support"
read_when:
  - Using or modifying the exec tool
  - Debugging stdin or TTY behavior
title: "Exec Tool"
---

# Exec tool

Run shell commands in the workspace. Supports foreground + background execution via `process`.
If `process` is disallowed, `exec` runs synchronously and ignores `yieldMs`/`background`.
Background sessions are scoped per agent; `process` only sees sessions from the same agent.

## Parameters

- `command` (required)
- `workdir` (defaults to cwd)
- `env` (key/value overrides)
- `yieldMs` (default 10000): auto-background after delay
- `background` (bool): background immediately
- `timeout` (seconds, default 1800): kill on expiry
- `pty` (bool): run in a pseudo-terminal when available (TTY-only CLIs, coding agents, terminal UIs). Use for CLIs that only print when stdout is a TTY (e.g. gog / Google Workspace CLI).
- `host` (`sandbox | gateway | node`): where to execute
- `security` (`deny | allowlist | full`): enforcement mode for `gateway`/`node`
- `ask` (`off | on-miss | always`): approval prompts for `gateway`/`node`
- `node` (string): node id/name for `host=node`
- `elevated` (bool): request elevated mode (gateway host); `security=full` is only forced when elevated resolves to `full`

Notes:

- `host` defaults to `sandbox`.
- `elevated` is ignored when sandboxing is off (exec already runs on the host).
- `gateway`/`node` approvals are controlled by `~/.openclaw/exec-approvals.json`.
- `node` requires a paired node (companion app or headless node host).
- If multiple nodes are available, set `exec.node` or `tools.exec.node` to select one.
- On non-Windows hosts, exec uses `SHELL` when set; if `SHELL` is `fish`, it prefers `bash` (or `sh`)
  from `PATH` to avoid fish-incompatible scripts, then falls back to `SHELL` if neither exists.
- Host execution (`gateway`/`node`) rejects `env.PATH` and loader overrides (`LD_*`/`DYLD_*`) to
  prevent binary hijacking or injected code.
- Important: sandboxing is **off by default**. If sandboxing is off, `host=sandbox` runs directly on
  the gateway host (no container) and **does not require approvals**. To require approvals, run with
  `host=gateway` and configure exec approvals (or enable sandboxing).

### TTY-only CLIs (e.g. gog)

Some CLIs write to stdout only when it is a TTY. In non-interactive contexts (exec tool, scripts, CI)
they exit with code 0 but produce no output. Examples: **gog** (Google Workspace CLI), and other
tools that use `isatty(stdout)` to decide whether to print. For these, set **`pty: true`** so the
command runs in a pseudo-terminal and output is captured.

Example:

```json
{ "tool": "exec", "command": "gog --version", "pty": true }
```

## Config

- `tools.exec.notifyOnExit` (default: true): when true, backgrounded exec sessions enqueue a system event and request a heartbeat on exit.
- `tools.exec.approvalRunningNoticeMs` (default: 10000): emit a single “running” notice when an approval-gated exec runs longer than this (0 disables).
- `tools.exec.host` (default: `sandbox`)
- `tools.exec.security` (default: `deny` for sandbox, `allowlist` for gateway + node when unset)
- `tools.exec.ask` (default: `on-miss`)
- `tools.exec.node` (default: unset)
- `tools.exec.pathPrepend`: list of directories to prepend to `PATH` for exec runs (gateway + sandbox only).
- `tools.exec.safeBins`: stdin-only safe binaries that can run without explicit allowlist entries.

Example:

```json5
{
  tools: {
    exec: {
      pathPrepend: ["~/bin", "/opt/oss/bin"],
    },
  },
}
```

### PATH handling

- `host=gateway`: merges your login-shell `PATH` into the exec environment. `env.PATH` overrides are
  rejected for host execution. The daemon itself still runs with a minimal `PATH`:
  - macOS: `/opt/homebrew/bin`, `/usr/local/bin`, `/usr/bin`, `/bin`
  - Linux: `/usr/local/bin`, `/usr/bin`, `/bin`
- `host=sandbox`: runs `sh -lc` (login shell) inside the container, so `/etc/profile` may reset `PATH`.
  OpenClaw prepends `env.PATH` after profile sourcing via an internal env var (no shell interpolation);
  `tools.exec.pathPrepend` applies here too.
- `host=node`: only non-blocked env overrides you pass are sent to the node. `env.PATH` overrides are
  rejected for host execution and ignored by node hosts. If you need additional PATH entries on a node,
  configure the node host service environment (systemd/launchd) or install tools in standard locations.

Per-agent node binding (use the agent list index in config):

```bash
openclaw config get agents.list
openclaw config set agents.list[0].tools.exec.node "node-id-or-name"
```

Control UI: the Nodes tab includes a small “Exec node binding” panel for the same settings.

## Session overrides (`/exec`)

Use `/exec` to set **per-session** defaults for `host`, `security`, `ask`, and `node`.
Send `/exec` with no arguments to show the current values.

Example:

```
/exec host=gateway security=allowlist ask=on-miss node=mac-1
```

## Authorization model

`/exec` is only honored for **authorized senders** (channel allowlists/pairing plus `commands.useAccessGroups`).
It updates **session state only** and does not write config. To hard-disable exec, deny it via tool
policy (`tools.deny: ["exec"]` or per-agent). Host approvals still apply unless you explicitly set
`security=full` and `ask=off`.

## Exec approvals (companion app / node host)

Sandboxed agents can require per-request approval before `exec` runs on the gateway or node host.
See [Exec approvals](/tools/exec-approvals) for the policy, allowlist, and UI flow.

When approvals are required, the exec tool returns immediately with
`status: "approval-pending"` and an approval id. Once approved (or denied / timed out),
the Gateway emits system events (`Exec finished` / `Exec denied`). If the command is still
running after `tools.exec.approvalRunningNoticeMs`, a single `Exec running` notice is emitted.

## Allowlist + safe bins

Allowlist enforcement matches **resolved binary paths only** (no basename matches). When
`security=allowlist`, shell commands are auto-allowed only if every pipeline segment is
allowlisted or a safe bin. Chaining (`;`, `&&`, `||`) and redirections are rejected in
allowlist mode unless every top-level segment satisfies the allowlist (including safe bins).
Redirections remain unsupported.

## Examples

Foreground:

```json
{ "tool": "exec", "command": "ls -la" }
```

Background + poll:

```json
{"tool":"exec","command":"npm run build","yieldMs":1000}
{"tool":"process","action":"poll","sessionId":"<id>"}
```

Send keys (tmux-style):

```json
{"tool":"process","action":"send-keys","sessionId":"<id>","keys":["Enter"]}
{"tool":"process","action":"send-keys","sessionId":"<id>","keys":["C-c"]}
{"tool":"process","action":"send-keys","sessionId":"<id>","keys":["Up","Up","Enter"]}
```

Submit (send CR only):

```json
{ "tool": "process", "action": "submit", "sessionId": "<id>" }
```

Paste (bracketed by default):

```json
{ "tool": "process", "action": "paste", "sessionId": "<id>", "text": "line1\nline2\n" }
```

## apply_patch (experimental)

`apply_patch` is a subtool of `exec` for structured multi-file edits.
Enable it explicitly:

```json5
{
  tools: {
    exec: {
      applyPatch: { enabled: true, workspaceOnly: true, allowModels: ["gpt-5.2"] },
    },
  },
}
```

Notes:

- Only available for OpenAI/OpenAI Codex models.
- Tool policy still applies; `allow: ["exec"]` implicitly allows `apply_patch`.
- Config lives under `tools.exec.applyPatch`.
- `tools.exec.applyPatch.workspaceOnly` defaults to `true` (workspace-contained). Set it to `false` only if you intentionally want `apply_patch` to write/delete outside the workspace directory.
